Switching current: 3mA - 10A
Test voltage (rms): 4000V
Relay module with 4-pole relay with forcibly guided contacts according to IEC 61810-3, application type A for mounting on 35 mm rail. With notched-crown contacts for switching currents from 3 mA to 8 A ideally suited for both monitoring circuits and load circuits.
Simplified installation due to plug-in terminals with screw and push-in technology.
Display of the control and protective circuitry are already an integral part of the module. Shortest possible release times of the switching contact are guaranteed by the use of a TVS diode.
Switching current: 3mA - 8A
Test voltage (rms): 4000V
The following product variants are available:
Other relay coil variants on request.
Maximum one packing unit available, contains 24 pieces.
| Number of Contacts NO: | 3 |
| Number of Contacts NC: | 1 |
| Contact Material: | AgCuNi + 0,2 ... 0,4 μm Au |
| Contact Type (Output Contacts): | Single contact with notched crown |
| Switching Current Range: | 3 mA ... 8 A |
| Test Voltage open Contact (rms): | 1500 Vrms / 1 min |
| Length in mm: | 100 |
| Width in mm: | 17,5 |
| Height in mm: | 120 |
| Type of Protection: | IP20 |
| Approvals: | cULus |
| Areas of Application: | Access control, interfaces, elevators, escalators, transportation, robots, machine tools and railway applications |
